If you have been in search of parts and components for the Sikorsky S-434, look no further than ASAP Aerospace. The Sikorsky S-434 is a light utility and trainer helicopter that is designed and developed by Sikorsky Aircraft. The helicopter was produced over the years between 2008 and 2015, and units still remain in active service under operators such as the Saudi Ministry of the Interior. The development of the Sikorsky S-434 first began during the 2000’s, derived from the Schweizer S-333 turbine-powered helicopter that was originally developed by Schweizer and later obtained by Sikorsky Aircraft. With the development of the S-434, the cockpit layout of the S-333 was borrowed while utilizing features of the MQ-8 Fire Scout.
Model No :
Sikorsky Schweizer S 434
Manufacturer :
Sikorsky Helicopter
Country :
United States
Manufactured :
2010 to: Onward
Engine :
2 X Rolls-Royce Turbine 250-C20W
Power :
320 horse[Power]
Max Cruise Speed :
105 knots - 194 Km/h
Approach Speed :
NA
Travel Range :
350 Nautical Miles - 648 Kilometers
Fuel Economy :
4.17 nautical mile / gallon - 2.040 kilometres / litre
Service Ceiling :
12,500 feet
Rate of Climb :
NA
Take Off Distance :
NA
Landing Distance :
NA
Max Tak eOff Weight :
1,315 Kg - 2,899 lbs
Max Payload :
544 Kg - 1,199 lbs
Fuel Tank Capacity :
84 gallon - 318 litre
Baggage Volume :
NA
Seats Economy/General Class :
4 seats
Seats Business Class :
0
Seats First Class :
0
Cabin Height :
NA
Cabin Width :
NA
Cabin Length :
NA
Exterior Length :
9.51 metre - 31.20 feet
Tail Height :
NA
Fuselage Diameter :
NA
Wing Span Rotor Diameter :
8.39 metre - 27.53 feet
With one
Rolls-Royce Turbine 250-C20W engine producing 320 horsepower, the Sikorsky S-434 can travel at a maximum cruise speed of 105 knots. The helicopter is also capable of travelling upwards of 350 nautical miles, provided by its fuel tank capacity of 84 gallons and average fuel economy of 4.17 nautical miles per gallon. In general, upwards of four persons are permissible within the Sikorsky S-434, and a maximum takeoff weight of 3,200 pounds is allowed for flight operations.
Whether you are in need of parts that are new, used, or obsolete, the experts at ASAP Aerospace can help you find everything you are searching for with ease. We invite you to peruse our available parts catalogues at your leisure, or you may utilize our provided search engine to find specific parts you are searching for in a matter of seconds. At ASAP Aerospace, quality is the cornerstone of our operations. Due to our unwavering commitment to such standards and practices, we operate as an FAA AC 00-56B, AS9120B, and ISO 9001:2015 certified enterprise. Get started with a competitive quote in as little as 15 minutes when you submit an Instant RFQ today.
