| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1600 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0810 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1242 INCHES MINIMUM SINGLE SHAFT AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5600 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 280.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 35.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 8.10 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 49.50 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 7.50 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.800 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0/+15.0 |
| AJVM | SPLINE TOOTH QUANTITY | 13 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -30.0/+30.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5400.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2700.0 CENTIMETER-GRAMS NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1870 INCHES NOMINAL SINGLE SHAFT |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 288.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 47.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 24.00 NOMINAL |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.125 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
