| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.4700 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 90.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 900.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 870.00 MINIMUM AND 1150.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.00 MINIMUM AND 85.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 195.00 MINIMUM AND 290.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 27.00 MINIMUM AND 37.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 32.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.070 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9300 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 MILLIMETERS SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708-16 GOVERNMENT SPECIFICATION |
