| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.6070 INCHES MINIMUM AND 1.6450 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3180 INCHES MINIMUM SINGLE SHAFT AND 0.3860 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 0.5 MINIMUM AND 16.5 MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 522.75 MINIMUM AND 707.25 MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 85.00 MINIMUM AND 115.00 MAXIMUM |
| AJTA | ZRS RESISTANCE IN OHMS | 697.00 MINIMUM AND 943.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 19.500 INPUT TO OUTPUT MINIMUM AND 22.500 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -15.0/+15.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -14.0/+14.0 |
| AJWQ | PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2900 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1232.50 MINIMUM AND 1667.50 MAXIMUM |
| CQZS | SHAFT SLOT DEPTH | 0.0270 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 246.45 MINIMUM AND 333.55 MAXIMUM |
| CRHN | SHAFT SLOT WIDTH | 0.0270 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 161.50 MINIMUM AND 218.50 MAXIMUM |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.400 ROTOR TO STATOR MINIMUM AND 0.416 ROTOR TO STATOR MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
