| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.6590 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 33.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 88.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 408.00 MINIMUM AND 552.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 1620.00 MINIMUM AND 1980.00 MAXIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 69.70 MINIMUM AND 9430.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 297.00 MINIMUM AND 363.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 501.00 MINIMUM AND 678.50 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 161.00 MINIMUM AND 218.00 MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 328.00 MINIMUM AND 402.00 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 54.00 MINIMUM AND 66.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 12.00 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0430 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
