| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ALUMINUM OR CORROSION RESISTANT STEEL |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1400 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.9000 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5470 INCHES MINIMUM SINGLE SHAFT AND 0.5770 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 12.0 DEG CELSIUS |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 87.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 210.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 175.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 25.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 143.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 10.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 22.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5630 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 690.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES MINIMUM SINGLE SHAFT AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 114.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TURRET |
