| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0570 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.437 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.5000 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.219 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.437 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.125 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/+0.10 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5/+0.5 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 45.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABXF | SHAFT LENGTH | 0.812 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.1820 INCHES MINIMUM AND 2.1920 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 177.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
