| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.650 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.070 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 12.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 16.500 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE AS604,SIZE 12-81343 NATIONAL STD/SPEC AND 81343-AS623 GOVERNMENT STANDARD |
