| MRC | Criteria | Characteristic |
|---|
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END 0.562 INCHES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 2B 1ST END 2B 2ND END |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, CHLOROPRENE |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 24.500 INCHES NOMINAL OVERALL |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADLG | (NON-CORE DATA) FIRST END FITTING SPEC/STD DATA | SAE J516, TABLE 4A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLH | (NON-CORE DATA) SECOND END FITTING SPEC/STD DATA | SAE J516, TABLE 4A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END UNJF 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.620 INCHES NOMINAL |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ADLF | (NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA | SAE J517, 100R1, TYPE AT, SIZE 6-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
