| MRC | Criteria | Characteristic |
|---|
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQQN | (NON-CORE DATA) EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL CHAFE GUARD, HEAT SHRINKABLE POLOLEFIN TUBING OR OVERALL CHAFE GUARD, POLYTETRAFLUOROETHYLENE TUBING |
| CRLL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED, MIL-STD-171, FINISH 5.4.1 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3B 1ST END 3B 2ND END |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304 OR NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321 OR NIPPLE STEEL, FED STD 66, AISI 347/SAE 30347 NUT STEEL, FED STD 66, AISI 304/SAE 30304 OR NUT STEEL, FED STD 66, AISI 316/SAE 30316 OR NUT STEEL, FED STD 66, AISI 347/SAE 30347 SOCKET STEEL, FED STD 66, AISI 304/SAE 30304 OR SOCKET STEEL, FED STD 66, AISI 321/SAE 30321 OR SOCKET STEEL, FED STD 66, AISI 347/SAE 30347 |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| AAJP | (NON-CORE DATA) OUTSIDE SURFACE TREATMENT | PASSIVATED |
| ABKV | OUTSIDE DIAMETER | 0.505 INCHES MAXIMUM |
| CQHW | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED, MIL-STD-171, FINISH 5.4.1 |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END UNJF 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 8.750 INCHES NOMINAL WORKING |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.212 INCHES MINIMUM |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| ADJS | EXTERIOR COLOR | NATURAL |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | NIPPLE STEEL, FED STD 66, AISI 304/SAE 30304 OR NIPPLE STEEL, FED STD 66, AISI 321/SAE 30321 OR NIPPLE STEEL, FED STD 66, AISI 347/SAE 30347 NUT STEEL, FED STD 66, AISI 304/SAE 30304 OR NUT STEEL, FED STD 66, AISI 316/SAE 30316 OR NUT STEEL, FED STD 66, AISI 347/SAE 30347 SOCKET STEEL, FED STD 66, AISI 304/SAE 30304 OR SOCKET STEEL, FED STD 66, AISI 321/SAE 30321 OR SOCKET STEEL, FED STD 66, AISI 347/SAE 30347 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END 0.438 INCHES 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| FEAT | SPECIAL FEATURES | PERMANENTLY ATTACHED END FITTINGS |
