| MRC | Criteria | Characteristic |
|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0/+50.0 |
| AAPP | ELECTRICAL RESISTANCE | 1.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 1.23457 MEGOHMS |
| AAPP | ELECTRICAL RESISTANCE | 27.473 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 28.409 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 29.412 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 30.488 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 31.646 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 33.670 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 35.211 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 37.037 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 38.911 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 41.152 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 757.580 KILOHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100/+0.100 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+125.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 16 |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.135 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.725 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.300 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.150 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.050 EACH RESISTOR |
| AFWW | TERMINAL WIDTH | 0.019 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | HARM MISSLE ASSEMBLY |
| CBME | CUBIC MEASURE | 0.033 CUBIC INCHES |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 10TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 11TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 2ND INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 5TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 6TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 7TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 8TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 9TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| PKWT | UNPACKAGED UNIT WEIGHT | 2.5 GRAMS |
| STYL | STYLE DESIGNATOR | DUAL INLINE |
| TEST | TEST DATA DOCUMENT | 30003-704AS9457 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
