| MRC | Criteria | Characteristic |
|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0/+50.0 |
| AAPP | ELECTRICAL RESISTANCE | 1.580 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 10.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 16.500 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 19.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 2.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 20.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 200.000 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 42.200 KILOHMS |
| AAPP | ELECTRICAL RESISTANCE | 649.000 OHMS |
| AAPP | ELECTRICAL RESISTANCE | 9.524 KILOHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+150.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 16 |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.735 INCHES MINIMUM AND 0.896 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.280 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.200 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK |
| AFWW | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.022 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 0.053 CUBIC INCHES |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 2ND INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 5TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 8TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 6TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 4 7TH INTERMEDIATE RESISTANCE VALUE |
| FEAT | SPECIAL FEATURES | BURN-IN REQUIRED |
| PKWT | UNPACKAGED UNIT WEIGHT | 2.0 GRAMS |
| STYL | STYLE DESIGNATOR | DUAL INLINE |
| TEST | TEST DATA DOCUMENT | 73030-5E4790/28 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
