2134CM10140-1 Part with NSN 3110001807672 by Clark Instrument Inc - Buy Now

Part Number: 2134CM10140-1

Alternate P/N: 2134CM101401

Manufacturer: Clark Instrument Inc

NSN: 3110-00-180-7672

Item Name : bearing ball rod en

CAGE Code: 12651

NIIN: 00-180-7672

FSC: 3110 Bearings Antifriction Unmounted

FSG: 31 Bearings

INC Code: 00049

Country: USA

NCB Code: 00

Thank you for taking an interest in Clark Instrument Inc part number 2134CM10140-1, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 2134CM10140-1, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number 2134CM10140-1 Details:

Part number 2134CM10140-1 traces back to Clark Instrument Inc (CAGE Code 12651), having been classified under NSN 3110001807672 and item name Bearing Ball Rod En. With its NSN, this part number belongs to FSG 31 Bearings and FSC 3110 Bearings Antifriction Unmounted. Additional listing data derived from the NSN includes the NIIN 001807672, the INC 00049, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2134CM10140-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If you Have Multiple Parts Requirements,
You Can Upload Your Parts List or BOM Here!

Upload

NSN Information for Part Number 2134CM10140-1 with NSN 3110-00-180-7672, 3110001807672

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-180-7672 Item PartTypeName: BEARING,BALL,ROD END	3110	001807672	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2134CM10140-1	6	9	5

Characteristics Data of NSN 3110-00-180-7672, 3110001807672

MRC	Criteria	Characteristic
AAZE	SHANK DIAMETER	0.3720 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM
AAZF	SHANK STYLE	SOLID
ABHP	OVERALL LENGTH	2.3430 INCHES NOMINAL
ABXV	BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	1.0620 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CTLK	SELF-ALIGNMENT ANGLE	8.00 DEGREES NOMINAL
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	ALUMINUM ALLOY 7075 ROD END BODY
MATT	MATERIAL	PLASTIC TETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE ROD END BODY
SFTT	SURFACE TREATMENT	ANODIZE ROD END BODY
SFTT	SURFACE TREATMENT	CADMIUM INNER RING
SFTT	SURFACE TREATMENT	CADMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
TEST	TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN