Thank you for taking an interest in Colinear Machine And Design Inc part number 68A412754-2004, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 68A412754-2004, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number 68A412754-2004 Details:
Part number 68A412754-2004 traces back to Colinear Machine And Design Inc (CAGE Code 1L8A4), having been classified under NSN 5360012505650 and item name Spring Helical Tors. With its NSN, this part number belongs to FSG 53 Hardware and Abrasives and FSC 5360 Coil Flat Leaf and Wire Springs. Additional listing data derived from the NSN includes the NIIN 012505650, the INC 04228, and NCB code 01 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5360-01-250-5650 Item PartTypeName: SPRING,HELICAL,TORSION | 5360 | 012505650 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 68A412754-2004 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 3.840 INCHES NOMINAL |
| AGEK | SPRING FREE LENGTH | 1.115 INCHES NOMINAL |
| APCN | COIL QUANTITY | 3-3/4 |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | 4.440 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| FEAT | SPECIAL FEATURES | ENDS THINNER AND WIDER FOR APPROX. LAST 2.140 IN. EACH END HAS TWO PUNCHED HOLES,0.318 IN. DIA,CENTERED 1.250 IN. APART WITH ONE SMALLER,THREADED HOLE BETWEEN THEM,CSK 90.0 DEG BY 0.275 IN. DIA |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE TORSION LEFT HAND |
| SUPP | SUPPLEMENTARY FEATURES | SHOT BLASTED ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
