| MRC | Criteria | Characteristic |
|---|
| CQBD | BURST TEST PRESSURE | 1540.0 POUNDS PER SQUARE INCH |
| ADJL | INNER CONVEYING TUBE STYLE | ANNULAR OPEN-PITCH CORRUGATED |
| CRLL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED, QQ-P-35, TYPE 1 |
| CRXX | MEASURING METHOD AND LENGTH | 13.500 INCHES NOMINAL WORKING |
| AAJD | THREAD CLASS | 3B 1ST END 3B 2ND END |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQGM | MAXIMUM OPERATING PRESSURE | 385.0 POUNDS PER SQUARE INCH |
| ABJH | TEMP RATING | -77.0 DEG FAHRENHEIT AND 650.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| ADLG | (NON-CORE DATA) FIRST END FITTING SPEC/STD DATA | AN8185J-88044 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLH | (NON-CORE DATA) SECOND END FITTING SPEC/STD DATA | AN8186J-88044 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AGAV | END ITEM IDENTIFICATION | MCDONNELL DOUGLAS C-17A AIRCRAFT |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END UNJF 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.510 INCHES NOMINAL |
| CQHW | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED, QQ-P-35, TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | STEEL, MIL-T-8808, COMP 321, TYPE 1 |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| AARX | INSIDE DIAMETER | 0.313 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.560 INCHES |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END 0.562 INCHES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 770.0 POUNDS PER SQUARE INCH |
