| MRC | Criteria | Characteristic |
|---|
| ABHP | OVERALL LENGTH | 4.2070 INCHES MINIMUM AND 4.2270 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.8740 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.5820 INCHES MINIMUM AND 0.5870 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0700 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| AGFU | INTERIOR FLANGE HOLE DIAMETER | 0.2550 INCHES MINIMUM AND 0.2750 INCHES MAXIMUM |
| AGFW | INTERIOR FLANGE WIDTH | 0.0850 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | CHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | CHAMFERED OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | ROUND LEFT FLANGE BODY CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| CSYM | SURFACE FINISH | 50.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| CSYM | SURFACE FINISH | 50.0 MICROINCHES RIGHT END SURFACE OF BODY |
| FEAT | SPECIAL FEATURES | FLATTED FLANGE,0.625 IN. FROM CENTER OF FLANGE TO EDGE OF FLAT,0.560 IN. RADIUS OF FLANGE |
| MATT | MATERIAL | STEEL OVERALL OR STEEL COMP H11 OVERALL |
| SFTT | SURFACE TREATMENT | CHROMATE ZINC INSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CHROMIUM LEFT END SURFACE OF BODY AND FLANGE |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTSIDE DIAMETER SURFACE OF FLANGE |
| SFTT | SURFACE TREATMENT | CHROMIUM RIGHT END SURFACE OF LEFT FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16173B MIL SPEC SINGLE TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN |
| AGFV | INTERIOR FLANGE LEFT END TO CENTERLINE DISTANCE | 0.4025 INCHES MINIMUM AND 0.4525 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| CSYM | SURFACE FINISH | 50.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
| CSYM | SURFACE FINISH | 50.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE |
| CSYM | SURFACE FINISH | 50.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | JH153,TY H11,FSCM 81205 MFR REF 1ST MATERIAL RESPONSE OVERALL OR AMS 6487 MFR REF 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CHROMIUM RIGHT END SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| STYL | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END, INTERIOR FLANGE(S) NOT LOCATED AT EITHER END |
