P-17084P Part with NSN 3120006727503 by Precision Products Corp - Buy Now

Part Number:  P-17084P
Alternate P/N:  P17084P
Manufacturer:  Precision Products Corp
Item Name :  bearing sleeve
CAGE Code:  13581
NIIN:  00-672-7503
FSG:  31 Bearings
INC Code:  13205
Country:  USA
NCB Code:  00

Thank you for taking an interest in Precision Products Corp part number P-17084P, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number P-17084P, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number P-17084P Details: 

Part number P-17084P traces back to Precision Products Corp (CAGE Code 13581), having been classified under NSN 3120006727503 and item name Bearing Sleeve. With its NSN, this part number belongs to FSG 31 Bearings and FSC 3120 Bearings Plain Unmounted. Additional listing data derived from the NSN includes the NIIN 006727503, the INC 13205, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for P-17084P

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number P-17084P with NSN 3120-00-672-7503, 3120006727503

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-672-7503

Item PartTypeName:

BEARING,SLEEVE

31200067275030N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
40789223

Characteristics Data of NSN 3120-00-672-7503, 3120006727503

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH7.3750 INCHES NOMINAL
ADARBODY OUTSIDE DIAMETER3.4980 INCHES MINIMUM AND 3.5000 INCHES MAXIMUM
ADASBODY INSIDE DIAMETER2.7500 INCHES MINIMUM AND 2.7510 INCHES MAXIMUM
AGFFFLANGE WIDTH0.9688 INCHES NOMINAL
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
AJFMEND TO FLANGE DISTANCE3.1250 INCHES NOMINAL
BZLXCORNER SHAPESQUARE INSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE INSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE BODY CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE RIGHT FLANGE BODY CORNER
BZLXCORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
CSYMSURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF FLANGE
CSYMSURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
CSYMSURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF FLANGE
CSYMSURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL
FEATSPECIAL FEATURES2.0312 IN. RADIUS OF FLANGE ON UPPER HALF OF BOTH SEGMENTS,1.8594 IN. RADIUS OF FLANGE ON LOWER HALF OF BOTH SEGMENTS,UPPER HALF OF CENTER FLANGE OUTSIDE LEFT CORNER UNDERCUT 0.1250 IN. W BY 0.1718 IN.,STYLE 69 INTERNAL GROOVE IN LOWER HALF
MATTMATERIALCOPPER ALLOY 937 OVERALL
STYLSTYLE DESIGNATORSEGMENTED,EXTERNAL FLANGE

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top