DREM4-334 Part with NSN 3120008096399 by Research Designing Service - Buy Now

Part Number: DREM4-334

Alternate P/N: DREM4334

Manufacturer: Research Designing Service

NSN: 3120-00-809-6399

Item Name : bearing plain rod end

CAGE Code: 81367

NIIN: 00-809-6399

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

INC Code: 13209

Country: USA

NCB Code: 00

Thank you for taking an interest in Research Designing Service part number DREM4-334, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number DREM4-334, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number DREM4-334 Details:

Part number DREM4-334 traces back to Research Designing Service (CAGE Code 81367), having been classified under NSN 3120008096399 and item name Bearing Plain Rod End. With its NSN, this part number belongs to FSG 31 Bearings and FSC 3120 Bearings Plain Unmounted. Additional listing data derived from the NSN includes the NIIN 008096399, the INC 13209, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DREM4-334

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If you Have Multiple Parts Requirements,
You Can Upload Your Parts List or BOM Here!

Upload

Characteristics Data of NSN 3120-00-809-6399, 3120008096399

MRC	Criteria	Characteristic
AAZE	SHANK DIAMETER	0.4989 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM
AAZF	SHANK STYLE	HOLLOW, UNTHREADED
AGGF	OUTER MEMBER OUTSIDE DIAMETER	0.7400 INCHES MINIMUM AND 0.7850 INCHES MAXIMUM
AGGH	OUTER MEMBER WIDTH	0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM
AGHC	SHANK INSIDE DIAMETER	0.2460 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM
AGHD	SHANK HOLE LENGTH	1.0000 INCHES NOMINAL
CQFM	HARDNESS RATING	32.0 ROCKWELL C MINIMUM ROD END BODY
MATT	MATERIAL	STEEL COMP 440C INNER MEMBER
TEST	TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
ABXV	BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
AGKP	STATIC RADIAL LOAD RATING	2400 POUNDS
STYL	STYLE DESIGNATOR	BALL TYPE
AGGG	BORE CENTER TO SHANK END DISTANCE	4.7300 INCHES MINIMUM AND 4.7500 INCHES MAXIMUM
AGGJ	INNER MEMBER WIDTH	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
ABHP	OVERALL LENGTH	5.1212 INCHES NOMINAL