Thank you for taking an interest in Rotating Precision Mechanisms Inc part number JTE60248, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number JTE60248, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number JTE60248 Details:
Part number JTE60248 traces back to Rotating Precision Mechanisms Inc (CAGE Code 54547), having been classified under NSN 3130016000428 and item name Bearing Unit Ball. With its NSN, this part number belongs to FSG 31 Bearings and FSC 3130 Bearings Mounted. Additional listing data derived from the NSN includes the NIIN 016000428, the INC 30556, and NCB code 01 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-600-0428 Item PartTypeName: BEARING UNIT,BALL | 3130 | 016000428 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JTE60248 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGKL | Lubrication Fitting Type | FLUSH |
| SFTT | Surface Treatment | CHROMIUM RACE |
| MATT | Material | RUBBER SYNTHETIC SEAL |
| MATT | Material | STEEL COMP E52100 BALL |
| AGAV | End Item Identification | ELECTRONIC WARFARE EQUIPMENT, NONAIRBORNE |
| MDCL | Material Document And Classification | AVON SPEC NUMBER BES 2-1-054, AISI 1552 MFR REF SINGLE MATERIAL RESPONSE RACE |
| LMDC | Lubrication Material Document And Classification | MIL-C-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| CXCY | Part Name Assigned By Controlling Agency | BEARING ASSY |
| MDCL | Material Document And Classification | AISI S2100 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| LBMA | Lubrication Material | GREASE |
| FEAT | Special Features | OUTSIDE DIA 26.125; CONTAINS 64 (.75 DIA) BALLS; TWO 1/8-27 NPT GREASE FITTINGS ARE LOCATED 180 DEG APART (RECEASED BELOW OD) TO INTERSECT WITH THE VERTICAL 1/8-27 NPT LUBE HOLES; HARDNESS RATING OF RACES 24-32 RC, BALLS 63-66RC, RACEWAY INDUCTION 58-63RC; HAS INV STUB TOOTH FORM, PITCH DIA 19, DIAMETRAL PITCH 8, PRESSURE ANAGLE 20 DEG, 152 TEETH, HARDNESS 24-32RC, CIRCULAR TOOTH THICKNESS 0.1963-0.1948; EACH RACE IS 2.0 INC HIGH, THEY DON'T ALIGN LEVEL, ENTIRE ASSEMBLY IS 2.50 HIGH |
| MATT | Material | STEEL RACE |
| CWGR | Lubrication Fitting Angle From Horizontal Centerline | 0.0 DEGREES NOMINAL |
| ABXV | Bore Diameter | 18.850 INCHES MINIMUM AND 18.856 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
