| MRC | Criteria | Characteristic |
|---|
| AEBW | Center To Center Distance Between Mounting Facilities Parallel To Height | 1.750 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CSWM | Shell Surface Treatment | CADMIUM AND CHROMATE AND NICKEL |
| AFRT | Shell Type | SOLID |
| THSD | Thread Series Designator | UNS |
| CSPT | Shell Material | ALUMINUM |
| CQYH | Contact Surface Treatment | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT | Precious Material | GOLD |
| AAJD | Thread Class | 2A |
| CQZG | Insert Material | RUBBER SILICONE CLASS Q SINGLE MATING END |
| ABMK | Overall Width | 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| ABHP | Overall Length | 1.662 INCHES MAXIMUM |
| AFQW | Mating End Quantity | 1 |
| AFRV | Connector Locking Method | EXTERNALLY THREADED SHELL |
| CRBJ | Contact Surface Treatment Document And Classification | MIL-G-45204, TY 2, GR C, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290, CL 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK | Distance From Mounting Shoulder To Front Face | 0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AAQL | Body Style | STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 1.750 INCHES NOMINAL |
| AWTN | Operating Temp Rating | -55.0 DEG CELSIUS MINIMUM AND 200.0 DEG CELSIUS MAXIMUM |
| AFQX | Contact Position Arrangement Style | 32-22 SINGLE MATING END |
| AFQR | Threaded Device Type | COUPLING FACILITY |
| CXCG | Included Contact Quantity | 54 SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST | Test Data Document | 81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| AFQZ | Contact Removability | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| ZZZK | Specification/Standard Data | 96906-MS3402 GOVERNMENT STANDARD |
| AFRN | Polarization Method | KEYWAY OR MULTIPLE KEYWAY |
| AAJF | Thread Direction | RIGHT-HAND |
| CQTM | Terminal Location | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC | Shell Surface Treatment Document And Classification | QQ-P-416, TY 2, CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416, TY 2, CL 3 FED SPEC 2ND TREATMENT RESPONSE |
| AFRE | Contact Maximum Dc Voltage Rating In Volts | 700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW | Overall Height | 2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| CQTZ | Contact Material | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC | Environmental Protection | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| CSCF | Terminal Type | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | Included Contact Type | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP | Insert Position In Deg | 110 |
| AKMG | Nominal Thread Length | 0.625 INCHES |
| CMLP | Thread Quantity Per Inch | 18 |
| AFRC | Contact Maximum Current Rating In Amps | 22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBV | Unthreaded Mounting Hole Diameter | 0.168 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| CQJX | Nominal Thread Size | 2.000 INCHES |
| PMWT | Precious Material And Weight | 0.054 GOLD GRAINS, TROY |
| AFRD | Contact Maximum Ac Voltage Rating In Volts | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | Precious Material And Location | CONTACT SURFACES GOLD |
