RAP3F5-2E9107A Part with NSN 3110000639706 by Timken Corporation - Buy Now

Part Number:  RAP3F5-2E9107A
Alternate P/N:  RAP3F52E9107A
Manufacturer:  Timken Corporation
Item Name :  bearing ball rod end
CAGE Code:  21335
NIIN:  00-063-9706
FSG:  31 Bearings
INC Code:  00049
Country:  USA
NCB Code:  00

Thank you for taking an interest in Timken Corporation part number RAP3F5-2E9107A, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number RAP3F5-2E9107A, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number RAP3F5-2E9107A Details: 

Part number RAP3F5-2E9107A traces back to Timken Corporation (CAGE Code 21335), having been classified under NSN 3110000639706 and item name Bearing Ball Rod End. With its NSN, this part number belongs to FSG 31 Bearings and FSC 3110 Bearings Antifriction Unmounted. Additional listing data derived from the NSN includes the NIIN 000639706, the INC 00049, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RAP3F5-2E9107A

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number RAP3F5-2E9107A with NSN 3110-00-063-9706, 3110000639706

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3110-00-063-9706

Item Description:

BEARING,BALL,ROD END

3110000639706N
CIICHCCESDPMICCriticalityENAC
Part NumberISCRNVCRNCCHCCMSDSSADC
RAP3F5-2E9107A695

Characteristics Data of NSN 3110-00-063-9706, 3110000639706

MRCCriteriaCharacteristic
FEATSPECIAL FEATURESPRELUBRICATED WITH 40 TO 50 PERCENT OF SPECIFIED GREASE; MAX NO. LOAD STARTING TORQUE 0.6400 OZ; BEARING SHALL CONFORM TO GENERAL DYNAMICS F. W. SPEC C 3116; DRILL HOLE NO. 50 DRILL; THRU SHANK PARALLEL WITH BORE 0.3125 IN. FROM SHANK END; MILL SLOT IN SHANK END PARALLEL WITH BORE 0.0610 IN. DEEP BY 0.0700 IN. WIDE AND 0.0004 IN. RADIAL CLEARANCE
ASDBWIDTH ACROSS FLATS0.4370 INCHES NOMINAL
AAZESHANK DIAMETER0.4370 INCHES NOMINAL
AAZFSHANK STYLEINTERNALLY THREADED W/HEXAGON END
STYLSTYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
MATTMATERIALSTEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT
ABXVBORE DIAMETER0.1900 INCHES NOMINAL
LMDCLUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
CQJXNOMINAL THREAD SIZE0.312 INCHES
AAJDTHREAD CLASS3B
AGGYSHANK THREAD LENGTH0.8125 INCHES NOMINAL
AAJFTHREAD DIRECTIONRIGHT-HAND
SFTTSURFACE TREATMENTCADMIUM OVERALL
AGVTOUTER RING WIDTH0.3280 INCHES NOMINAL
ADZGLUBRICATION MATERIALGREASE
AGVUINNER RING WIDTH0.4370 INCHES NOMINAL
AGXHLENGTH FROM BORE CENTER TO SHANK END1.3750 INCHES NOMINAL
CTLKSELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
AGYJSEAL QUANTITY2
AGYWBEARING SEAL TYPECONTACT
AGZAALIGNMENT TYPESELF-ALIGNING
ABHPOVERALL LENGTH1.7650 INCHES NOMINAL
THSDTHREAD SERIES DESIGNATORUNF
CMLPTHREAD QUANTITY PER INCH24

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top