PME5540 OHM 0.25 T2 Part with NSN 5905012599396 by Aeroflex Control Components Inc - Buy Now

Part Number:  PME5540 OHM 0.25 T2
Item Name :  resistor fixed film
CAGE Code:  64537
NIIN:  01-259-9396
INC Code:  05311
Country:  USA
NCB Code:  01

Thank you for taking an interest in Aeroflex Control Components Inc part number PME5540 OHM 0.25 T2, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number PME5540 OHM 0.25 T2, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number PME5540 OHM 0.25 T2 Details: 

Part number PME5540 OHM 0.25 T2 traces back to Aeroflex Control Components Inc (CAGE Code 64537), having been classified under NSN 5905012599396 and item name Resistor Fixed Film. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 012599396, the INC 05311, and NCB code 01 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PME5540 OHM 0.25 T2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number PME5540 OHM 0.25 T2 with NSN 5905-01-259-9396, 5905012599396

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-259-9396

Item PartTypeName:

RESISTOR,FIXED,FILM

59050125993960NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
MIL-PRF-55182/1514

Characteristics Data of NSN 5905-01-259-9396, 5905012599396

MRCCriteriaCharacteristic
SR-1Definitive Government Spec/Std Reference Or Manufacturers Code81349
AAPPElectrical Resistance40.000 OHMS
AAPETemp Coefficient Of Resistance In Ppm Per Deg Celsius-50.0 TO 50.0
AAQHTemp Range Of Temp Coefficient In Deg Celsius-55.0 TO 175.0
AEFBPower Dissipation Rating In Watts0.100 FREE AIR
AAQZInclosure MethodENCAPSULATED
SR-1Definitive Government Spec/Std Reference Or Manufacturers CodeRNC55H40R0BS
SR-1Definitive Government Spec/Std Reference Or Manufacturers CodeMIL-R-55182/1
TESTTest Data Document81349-MIL-R-55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AARFMil-Std-1276 Wire Lead Type DesignatorC
ABJTTerminal Length1.625 INCHES MAXIMUM
STYLStyle DesignatorAXIAL TERMINAL EACH END
AAQGAmbient Temp In Deg Celsius At Zero Percent Rated Power175
AAPQResistance Tolerance In Percent-0.100 TO 0.100
MRCDecoded RequirementClear Text Reply
ABPMBody Diameter0.078 INCHES MINIMUM AND
AARHReliability Failure Rate Level In Percent0.001
ADAQBody Length0.204 INCHES MINIMUM AND
ADAQBody Length0.281 INCHES MAXIMUM
PKWTUnpackaged Unit Weight0.3 GRAMS
AARBTerminal TypeWIRE LEAD
ABPMBody Diameter0.140 INCHES MAXIMUM
AARGReliability IndicatorESTABLISHED
AAQFAmbient Temp In Deg Celsius At Full Rated Power125
ABJTTerminal Length1.000 INCHES MINIMUM AND
ZZZKSpecification/Standard Data81349-MIL-R-55182/1 GOVERNMENT SPECIFICATION
SR-1Definitive Government Spec/Std Reference Or Manufacturers Code

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top