Thank you for taking an interest in Allis Chalmers Corp part number 0E1629, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 0E1629, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number 0E1629 Details:
Part number 0E1629 traces back to Allis Chalmers Corp (CAGE Code 92392), having been classified under NSN 2920002943479 and item name Generator Engine Ac. With its NSN, this part number belongs to FSG 29 Engine Accessories and FSC 2920 Engine Electrical System Components Nonaircraft. Additional listing data derived from the NSN includes the NIIN 002943479, the INC 17311, and NCB code 00 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-294-3479 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 002943479 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1105906 | 2 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.906 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL |
| AAUK | SPLINE WIDTH | 0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| ABSA | SPLINE QUANTITY | 6 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 1.938 INCHES NOMINAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1500 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 26.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 880 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END,THREADED |
| BCGT | COTTER PIN HOLE | INCLUDED |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.500 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 8.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.181 INCHES MINIMUM AND 8.195 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.328 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 1800 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 14 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
