QFBR-3046 Part with NSN 6020012822518 by Avago Technologies Us Inc - Buy Now

Part Number: QFBR-3046

Alternate P/N: QFBR3046

Manufacturer: Avago Technologies Us Inc

NSN: 6020-01-282-2518

Item Name : cable assembly fibe

CAGE Code: 50434

NIIN: 01-282-2518

FSC: 6020 Fiber Optic Cable Assembly and Harness

FSG: 60 Fiber Optics Materials Components Assemblies and Accessories

INC Code: 32278

Country: USA

NCB Code: 01

Thank you for taking an interest in Avago Technologies Us Inc part number QFBR-3046, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number QFBR-3046, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number QFBR-3046 Details:

Part number QFBR-3046 traces back to Avago Technologies Us Inc (CAGE Code 50434), having been classified under NSN 6020012822518 and item name Cable Assembly Fibe. With its NSN, this part number belongs to FSG 60 Fiber Optics Materials Components Assemblies and Accessories and FSC 6020 Fiber Optic Cable Assembly and Harness. Additional listing data derived from the NSN includes the NIIN 012822518, the INC 32278, and NCB code 01 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for QFBR-3046

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If you Have Multiple Parts Requirements,
You Can Upload Your Parts List or BOM Here!

Upload

Characteristics Data of NSN 6020-01-282-2518, 6020012822518

MRC	Criteria	Characteristic
AGAV	End Item Identification	MK74MOD14
FEAT	Special Features	FIBER OPTIC CABLE SHOULD CONSIST OF A SINGLE FUSED SILICA,PARTIALLY GRADED INDEX; GLASS CLAD FIBER SURROUNDED BY SILICONE COATING; BUFFER JACKET; AND TENSILE STRENGTH MEMBERS; THEN COVERED BY SCUFF-RESISTANT OUTER JACKET; PROPAGATION DELAYS INCREASE AT 5 NS PER METER OF CABLE LENGTH INCREASE; DATA RATE: AS LIMITED BY PULSE WIDTH DISTORTION,IS NOT AFFECTED BY INCREASING CABLE LENGTH,IF THE OPTICAL POWER LEVEL IS MAINTAINED; NOMINAL PROPAGATION DELAY 6 NS; CABLE LENGTH SHALL BE 11.500 NOMINAL TO 12.000 INCHES MAXIMUM; FORWARD PEAK CURRENT: SHOULD NOT BE LESS THAN 10.0 MA,IN THE ON STATE WITH NO DUTY FACTOR RESTRICTION; OPERATING TEMPERATURE: MINUS 20.0 TO PLUS 70.0 DEGREES CELSIUS MAX; FLEXING: 180.0 DEGREES BENDING AT MINIMUM BEND RADIUS OF 20.0 MM NO LOAD,TO A TENSILE LOAD OF 2.25 POUNDS MAX; CABLE CONNECTORS 0.300 TO 0.330 INCHES HEX NOMINAL; THREAD ENDS ARE 0.250-36 UNF-2B
MRC	Decoded Requirement	Clear Text Reply