Thank you for taking an interest in Bei Sensors And Systems Company Inc part number 1600-567, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 1600-567, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number 1600-567 Details:
Part number 1600-567 traces back to Bei Sensors And Systems Company Inc (CAGE Code 11534), having been classified under NSN 5905006749698 and item name Resistor Variable W. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 006749698, the INC 37408, and NCB code 00 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-674-9698 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 006749698 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 200-5500 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.6200 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.740 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.875 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.562 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.7400 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 1.90 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.30 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS 1ST SECTION AND 25.000 KILOHMS 2ND SECTION AND 25.000 KILOHMS 3RD SECTION AND 10.000 KILOHMS 4TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 1ST SECTION AND 340.0 1ST SECTION AND 354.0 1ST SECTION AND 0.0 2ND SECTION AND 340.0 2ND SECTION AND 0.0 3RD SECTION AND 340.0 3RD SECTION AND 0.0 4TH SECTION AND 340.0 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.75 TO 0.75 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS PROPORTIONAL CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 1ST SECTION AND 2 2ND SECTION AND 2 3RD SECTION AND 2 4TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 10001-1088621 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 21 TAB,SOLDER LUG |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
