20115 Part with NSN 5905008879471 by General Dynamics Global Imaging - Buy Now

Part Number:  20115
Item Name :  resistor variable w
CAGE Code:  10112
NIIN:  00-887-9471
INC Code:  37408
Country:  USA
NCB Code:  00

Thank you for taking an interest in General Dynamics Global Imaging part number 20115, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 20115, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number 20115 Details: 

Part number 20115 traces back to General Dynamics Global Imaging (CAGE Code 10112), having been classified under NSN 5905008879471 and item name Resistor Variable W. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 008879471, the INC 37408, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20115

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 20115 with NSN 5905-00-887-9471, 5905008879471

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-887-9471

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050088794710N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
116FTS127625

Characteristics Data of NSN 5905-00-887-9471, 5905008879471

MRCCriteriaCharacteristic
ABPCUNDERCUT WIDTH1.0890 INCHES MINIMUM AND 1.0990 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER1.0890 INCHES MINIMUM AND 1.0990 INCHES MAXIMUM
AEDZSHAFT BEARING TYPEBALL
AEFKMAXIMUM STARTING TORQUE0.60 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
AEFYSHAFT END PLAY0.005 INCHES
AEGALATERAL RUNOUT0.001 INCHES
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0 TO 400.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
AAPNSECTION QUANTITY3
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.0295 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM
AAVMPILOT LENGTH0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER1.0295 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
ABPMBODY DIAMETER1.089 INCHES MINIMUM AND 1.099 INCHES MAXIMUM
ABXFSHAFT LENGTH0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM
ADAQBODY LENGTH1.135 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION343.0 NOMINAL AND 347.0 NOMINAL
AEFZSHAFT RUNOUT0.001 INCHES
AEGBPILOT DIAMETER RUNOUT0.001 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.5
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION40.0 KILOHMS 1ST SECTION AND 40.0 KILOHMS 2ND SECTION AND 20.0 KILOHMS 3RD SECTION
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 1ST SECTION AND-2.00 TO 2.00 2ND SECTION AND-0.60 TO 0.60 3RD SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION5 1ST SECTION AND 5 2ND SECTION AND 3 3RD SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2000.0 SINGLE SECTION
CSBXFUNCTION CHARACTERISTIC PER SECTION1ST SECTION 360 DEG COSINE AND 2ND SECTION 360 DEG COSINE AND 3RD SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY16 TURRET

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top