IELK 11 1 62 7 5 A 01 V Part with NSN 5925015243485 by Sensata Technologies Inc - Buy Now

Part Number:  IELK 11 1 62 7 5 A 01 V
Manufacturer:  Sensata Technologies Inc
Item Name :  circuit breaker
CAGE Code:  81541
NIIN:  01-524-3485
INC Code:  00136
Country:  USA
NCB Code:  01

Thank you for taking an interest in Sensata Technologies Inc part number IELK 11 1 62 7 5 A 01 V, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number IELK 11 1 62 7 5 A 01 V, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number IELK 11 1 62 7 5 A 01 V Details: 

Part number IELK 11 1 62 7 5 A 01 V traces back to Sensata Technologies Inc (CAGE Code 81541), having been classified under NSN 5925015243485 and item name Circuit Breaker. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5925 Circuit Breakers. Additional listing data derived from the NSN includes the NIIN 015243485, the INC 00136, and NCB code 01 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for IELK 11 1 62 7 5 A 01 V

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 5925-01-524-3485, 5925015243485

MRCCriteriaCharacteristic
CPRNULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT125.0 ALL LOCATIONS
CQJXNOMINAL THREAD SIZE3.0 MILLIMETERS
CPRQRESET METHODMANUAL
CQQRTHREAD PITCH IN MILLIMETERS1.00
AGAVIII END ITEM IDENTIFICATIONSEA DART MISSILE TEST EQUIPMENT
AKPXPOLE QUANTITY2
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.750 INCHES NOMINAL
ADATBODY WIDTH1.859 INCHES NOMINAL
CPRJTRIP RELEASE METHODMAGNETIC ALL LOCATIONS
AAQLBODY STYLEMULTIPOLE-SINGLE ACTUATOR TYPE
CPLMMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE7.5 AMPERES AC ALL LOCATIONS
CPRLTRIP RELEASE CHARACTERISTICTIME DELAY ALL LOCATIONS
FREQFREQUENCY IN HERTZ50.0 OR 60.0 ALL LOCATIONS
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH1.940 INCHES NOMINAL
CPRFOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS250.0 AC ALL LOCATIONS
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH0.750 INCHES NOMINAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
CPRTMANUAL ACTUATOR TYPE AND QUANTITY1 TOGGLE
CPRWACTUATOR FUNCTIONTRIP-RESET
TTQYTERMINAL TYPE AND QUANTITY4 THREADED STUD
CPSMINTERNAL TRIP RELEASE CONFIGURATIONSERIES TRIP ALL LOCATIONS
CQWNTRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT10.000 MINIMUM AT 125 PCT AND 120.000 MAXIMUM AT 125 PCT ALL LOCATIONS
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS2000.0 AC ALL LOCATIONS
CPRXACTUATOR POSITION DESIGNATIONBETWEEN POLE ONE AND TWO
AJECBOSS HEIGHT0.140 INCHES NOMINAL
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
ADTVCASE MATERIALMETAL
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE2.404 INCHES NOMINAL
THSDTHREAD SERIES DESIGNATORISO M
ADAQBODY LENGTH2.490 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.060 INCHES NOMINAL

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top