MD20-10S630 Part with NSN 5905007928444 by Sensor Systems Inc - Buy Now

Part Number:  MD20-10S630
Alternate P/N:  MD2010S630
Manufacturer:  Sensor Systems Inc
Item Name :  resistor variable w
CAGE Code:  04454
NIIN:  00-792-8444
INC Code:  37408
Country:  USA
NCB Code:  00

Thank you for taking an interest in Sensor Systems Inc part number MD20-10S630, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number MD20-10S630, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number MD20-10S630 Details: 

Part number MD20-10S630 traces back to Sensor Systems Inc (CAGE Code 04454), having been classified under NSN 5905007928444 and item name Resistor Variable W. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 007928444, the INC 37408, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MD20-10S630

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MD20-10S630 with NSN 5905-00-792-8444, 5905007928444

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-792-8444

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050079284440N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
227880-1C23

Characteristics Data of NSN 5905-00-792-8444, 5905007928444

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH3.312 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER1.812 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABPMBODY DIAMETER2.000 INCHES NOMINAL
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ADAQBODY LENGTH1.781 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0930 INCHES NOMINAL
AEFDACTUATOR TYPESINGLE SHAFT
AFJNFRAGILITY FACTORMODERATELY RUGGED
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3785.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-1250.0 TO 1250.0 OHMS SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS25000.0 SINGLE SECTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION GRAPH
TESTTEST DATA DOCUMENT37695-227880 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY4 TURRET
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AAVLPILOT DIAMETER1.8750 INCHES NOMINAL
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABXFSHAFT LENGTH1.500 INCHES NOMINAL
ADAVOVERALL DIAMETER2.469 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.75 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.75 INCH-OUNCES
APXHTERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS SINGLE SECTION
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.005 TO 0.005 SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER80.0 SINGLE SECTION

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top