Thank you for taking an interest in Techno Components Corp part number 105-609-20K, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 105-609-20K, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number 105-609-20K Details:
Part number 105-609-20K traces back to Techno Components Corp (CAGE Code 17826), having been classified under NSN 5905012323338 and item name Resistor Variable W. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 012323338, the INC 37406, and NCB code 01 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-232-3338 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 012323338 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 105-609-20K | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/BUSHING/SLOT MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.749 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.077 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.093 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.312 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.437 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.282 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.453 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AGAV | END ITEM IDENTIFICATION | C5B ACFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.375 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE |
| CBBL | FEATURES PROVIDED | SHAFT SEAL |
| CBME | CUBIC MEASURE | 0.0558 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 50.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 105.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 89305-037878 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
