1601 Part with NSN 5905000189870 by Bei Sensors And Systems Company Inc - Buy Now

Part Number:  1601
Item Name :  resistor variable w
CAGE Code:  11534
NIIN:  00-018-9870
INC Code:  37408
Country:  USA
NCB Code:  00

Thank you for taking an interest in Bei Sensors And Systems Company Inc part number 1601, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number 1601, where we make it easy to secure competitive pricing and procurement options from our staff.

Part Number 1601 Details: 

Part number 1601 traces back to Bei Sensors And Systems Company Inc (CAGE Code 11534), having been classified under NSN 5905000189870 and item name Resistor Variable W. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5905 Resistors. Additional listing data derived from the NSN includes the NIIN 000189870, the INC 37408, and NCB code 00 (USA).

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1601

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 1601 with NSN 5905-00-018-9870, 5905000189870

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-018-9870

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050001898700N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
1600-614225

Characteristics Data of NSN 5905-00-018-9870, 5905000189870

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABHPOVERALL LENGTH2.498 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.562 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0730 INCHES NOMINAL
ABPMBODY DIAMETER1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ABXFSHAFT LENGTH0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM
ADAQBODY LENGTH1.560 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.186 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0930 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE1.40 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFYSHAFT END PLAY0.0025 INCHES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.001 INCHES
AEGBPILOT DIAMETER RUNOUT0.0015 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION1.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG333.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.1 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS TABLE
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
TESTTEST DATA DOCUMENT18876-10132431 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY6 TURRET

Company Statistics

250+

Million
Parts Sold

80+

Million
Parts Available

55+

Thousand
Happy Customers

us_flag

We are proud to supply every branch of the United States military

We Serve

  • US Military
  • Foreign Militaries
  • Maintenance and Repair Station
  • Prime Contractors and Subcontractors
  • Commercial Airlines - Major, National & Regionals
  • Government Agency
  • Manufacturer
  • Charter Operator

What you Get

  • Response within 15 minutes by our dedicated manager
  • Quote for all your Aerospace Parts Requirement
bottom to top