Thank you for taking an interest in General Dynamics Global Imaging part number VCT23 36-6A, which is currently available for purchase today here on ASAP Aerospace. You have reached our Request for Quote (RFQ) page for this part number VCT23 36-6A, where we make it easy to secure competitive pricing and procurement options from our staff.
Part Number VCT23 36-6A Details:
Part number VCT23 36-6A traces back to General Dynamics Global Imaging (CAGE Code 10112), having been classified under NSN 5990008473806 and item name Synchro Control Tra. With its NSN, this part number belongs to FSG 59 Electrical and Electronic Equipment Components and FSC 5990 Synchros and Resolvers. Additional listing data derived from the NSN includes the NIIN 008473806, the INC 15289, and NCB code 00 (USA).
Note : We Will Not Share Your Information To Any Third Parties.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-847-3806 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008473806 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AS20708/94 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2660 INCHES NOMINAL SINGLE SHAFT |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2746.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 4027.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 81.00 NOMINAL |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-20708 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/94 GOVERNMENT SPECIFICATION |
| AAQL | BODY STYLE | STANDARD ROUND D |
| ABHP | OVERALL LENGTH | 4.2940 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AJSL | BODY SIZE | 23 |
| AJSP | STATOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 500.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 1015.00 NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAVH | SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2402 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 45.0 DEG CELSIUS |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 492.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 239.00 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.2500 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.4450 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.6420 INCHES NOMINAL |
Million
Parts Sold
Million
Parts Available
Thousand
Happy Customers
